Axle Assembly - Semi-Mount; Level Rods - Pull Type - RHINO FC-0110 Operator's Manual

AXLE ASSEMBLY - SEMI-MOUNT

1. Attach the Axle Arm (2) and the Axle Arm Plate (5) around the Main Axle Tube (1) as shown. Secure with
3/4" x 6" Hex Bolts (9) and 3/4" Toplock Nuts (10).
2. Insert the Castor (3) into the Axle Arm (2) and 1-1/2" Washer (11) and secure with 3/8" x 2-1/2" Cotter Pin
(12) as Shown.
3. Insert the Hub & Spindle assembly (4) into the Castor (3) and secure with 1/2" x 3-1/4" Hex Bolt (13) and 1/
2" Toplock Nut (8).

LEVEL RODS - PULL TYPE

Attach the level rods to the lower lugs on tongue and to lugs on the rear axle tube using pins, washers and
cotter pins.
NOTE: The adjusting nuts on control rods should be to rear of machine and should always be adjusted with
equal tension on both rods
NOTE: The jam nut has left-handed threads
TR308 04/21
@ 2021 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-7