RHINO FC-0110 Operator's Manual page 86

Mower ID# ____________________
Date:________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the mower is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
The Operator's Manual is in the cannister on the mower
All safety decals are in place and legible
The tongue/hitch connection bolts and pins are tight
There are no cracks in tongue or hitch
The tow chain is secured to the tractor and mower
The hydraulic cylinder pins are tight
There are no leaking or damaged hoses
The mower deck is clear of cut grass and debris
Chain guards/deflectors are in place and in good condition
Driveline/gearbox shields are in good condition
Driveline clutches are in good condition: not frozen
Driveline telescoping members & U-joints are lubricated
Driveline yokes are securely attached to PTO & mower
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lug nuts are tight
Transport locks are in good condition
Make:________________________
Operator's Signature: ____________________________________________
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
TR308 04/21
@ 2021 Alamo Group Inc.
OPERATION
Item
Shift:_________________________
Operation Section 4-28
IMPORTANT:
Scan
this QR Code for an
electronic copy of this
inspection sheet.
Condition Specific Comments
at Start of Shift
www.alg
if not OK