3-Point Quick Check; Connecting Mower - Lift Type Quick Hitch - RHINO FC-0110 Operator's Manual

5.2 3-Point Quick Check

Our 3-Point Quick Hitch is designed to connect to
a Quick-Attach Coupler making mounting and
dismounting your mower easier. The 3-Point Quick
Hitch is also designed to connect the cutter to a
tractor's three-point linkage without the use of a
Quick-Attach Coupler.

5.3 Connecting Mower - Lift Type Quick Hitch

Crushing Hazard between Quick-Hitch and Implement. Do not allow anyone to stand between
the Quick-Hitch and implement during hook-up operations. Never operate the hydraulic 3-
point lift controls while someone is directly behind the tractor.
1. Make certain the implement's upper and
lower hitch pins are secured
2. Lower the tractor's 3-point lift until the three
Quick-Hitch hooks are lower than the
implements hitch pins. Carefully back the
tractor to align the Quick-Hitch hooks under
the implement's hitch pins.
3. Slowly raise the tractor's 3-point lift until the
lower Quick-hitch hooks lock into place over
the implement's 3-point hitch pins.
IMPORTANT: Make certain the implement's top
3-point hitch pin is captured by the Quick-Hitch
top 3-point hook. If not consult your Quick Hitch
manual for required adjustment.
IMPORTANT: The Quick Hitch will move mower
further from tractor which will require checking
the following:
1. Driveline length
2. Tractor stability
TR308 04/21
@ 2021 Alamo Group Inc.
OPERATION
Operation Section 4-10