Shutting Down The Implement; Disconnecting The Mower From The Tractor - RHINO FN120 Operator's Manual

Flex-wing mechanical level lift rotary mower
Hide thumbs Also See for FN120:
Table of Contents

Advertisement

10.7 Shutting Down the Implement

To shut down attached mower head, first bring the
tractor to a complete stop. Decrease engine RPM
to idle then disengage cutterhead. The mower head
will come to a complete stop within a suitable
amount of time. Do not engage or disengage the
cutterheads at a high RPM unless there is an
emergency situation.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-U- 0016

11. DISCONNECTING THE MOWER FROM THE TRACTOR

Before disconnecting the mower, the PTO must be disengaged and blade rotation at a complete stop. Move
the mower to a level storage location and lower the center section and both wings to the ground. If the mower
will be stored with the wings in the raised position, install both wing transport lock braces. If the mower is not
resting securely on the ground, block the mower up securely before attempting to disconnect it from the
tractor.
Use extreme care to keep feet and hands from under the mower and clear of any pinch points. OPS-R-0030
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
FN180/FN120 01/11
© 2011 Alamo Group Inc.
OPERATION
(S3PT-15)
Operation Section 4-40

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Fn180

Table of Contents