Table of Contents
Advertisement
HAZARDS WITH MAINTENANCE OF IMPLEMENT (CONTINUED)
AVOID DEATH OR SERIOUS INJURY FROM COMPONENT FAILURE BY KEEPING
IMPLEMENT IN GOOD OPERATING CONDITION IN PERFORMING PROPER SERVICE,
REPAIRS AND MAINTENANCE.
PERFORM SERVICE, REPAIRS, LUBRICATION AND MAINTENANCE OUTLINED IN IMPLEMENT
MAINTENANCE SECTION:
•
INSPECT for loose fasteners, worn or broken parts, leaky or loose fittings, missing or broken cotter keys
and washers on pins, and all moving parts for wear.
•
REPLACE any worn or broken parts with authorized service parts.
LUBRICATE unit as specified by lubrication schedule.
•
•
NEVER lubricate, adjust or remove material while it is running or in motion.
•
TORQUE all bolts and nuts as specified.
BLADE INSPECTION:
•
REPLACE bent, damage, cracked or broken blades immediately with new blades.
AVOID blade failures and thrown broken blades. DO NOT straighten, weld, or weld hard-facing blades.
•
SAFETY SHIELDS, GUARDS AND SAFETY DEVICES INSPECTION:
KEEP all Deflectors, Chain Guards, Steel Guards, Gearbox Shields, and PTO integral shields, Bands, Side
•
Skirts and Skid Shoes in place and in good condition.
•
REPLACE any missing, broken or worn safety shields, guards and safety devices.
TR308 04/21
@ 2021 Alamo Group Inc.
SAFETY
Cancer and Reproductive Harm www.P65Warnings.ca.gov PN HM02-A
Safety Section 1-15
Advertisement
Table of Contents
