Installing The Machine Box On The Cabinet; Connecting The Port; Connecting The Console Port - Bdcom S2528PB Hardware Installation Manual

3.2.2 Installing the Machine Box on the Cabinet

The machine box of the switch is fixed on the cabinet through the brackets. When
you fix the brackets, the front template of the switch faces forward. The detailed
operations are shown in Figure 3-1.
After the brackets are installed, install the switch on the cabinet. See Figure 3-2.

3.3 Connecting the Port

3.3.1 Connecting the Console Port

The switch of S2528PB has a console port.
The rate of the console port is a value ranging from 1200bps to 115200bps. It has a
standard RJ45 plug. After you connect the console port to the serial port of PC
through a console cable, you can configure and monitor the switch of S2528PB by
running the terminal emulation software, such as super Windows terminal. The
cable is provided according to the host. The communication parameters of the
terminal serial port can be set to a rate of 9600bps, eight data bits, one stop bit, no
sum check bit and traffic control.
The RJ45 connector of the console port is shown in Figure 3-3. The RJ45 plug
corresponds to the RJ45 socket, whose pins can be aligned from left to right with
the value from 1 to 8.
Figure 3- 1 Fixing the machine box of the switch
Figure 3- 2 Installing the switch on the cabinet
S2528PB Hardware Installation Manual
- 10 -