Camera Connection - Flashforge Creator 3 Pro User Manual

Before using the camera, please remove the cover at the front of the camera.
· WLAN network camera connection
1. Click [Tools]-[Setting]-[WiFi] in the main interface of the
touch screen of the equipment in turn, turn on the WLAN
network connection button and connect to the network.
3. Open the browser, enter and go to the address 10.33.23.180:8080 (The example is for reference only. The local IP
address shall prevail.), and click [Stream] to view the internal camera screen of Creator 3 Pro.
Note: The results of clicking [Stream] using a browser on a computer, mobile phone, or tablet computer are the same.

5.6 Camera Connection

2. Click [Tools]-[Setting]-[About] in turn in the main
interface to query and record the equipment Wi-Fi IP
address: 10.33.23.180 (The example is for reference only.
The local IP address shall prevail.)
21