Flashforge Creator 3 Pro User Manual page 3

CAUTIONS
Do not leave the running equipment for a long time.
Do not make any modifications to the equipment.
Please keep the distance between the extruder and the build plate for at least 50mm during filament loading
operation. (Too-close distance may cause extruder blockage.)
Operate the equipment in a well-ventilated environment.
Do not use the equipment for illegal activities.
Do not use the equipment to make any food storage products.
Do not use the equipment to make any electrical appliances.
Do not put the printed model into your mouth.
Do not remove the printed models with brute force.
Do not connect the equipment with the network cable longer than 3m.
ENVIRONMENT REQUIREMENTS
Temperature: RT 15-30℃
Humidity: 20%-70%
EQUIPMENT PLACING REQUIREMENTS
The equipment must be placed in a dry and ventilated environment. The distances of the left, right and rear side
space of the equipment should be at least 20cm, and the distance of the front side space should be at least 35cm.
COMPATIBLE FILAMENT REQUIREMENTS
When using the equipment, please use Flashforge filaments or other filaments provided or specified by Flashforge.
There is a wide variety of filaments on the market with varying quality. Poor quality or incompatible filaments can
easily cause extruder blockage and extruder damage.
FILAMENT STORAGE REQUIREMENTS
Do not unpack the filament until it is needed for use. Please store the filament in a dry and dust-free environment
after unpacking.
LEGAL NOTICE
Do not copy or print any items prohibited by law.
According to local laws, it is generally illegal to copy or print the following items：
1. Gun
2. Copy works protected by the copyright. Some copyrighted works may be allowed to be partially copied for "fair
use". Multiple copies will be regarded as improper use. Artistic works are equivalent to copyrighted works.
The above list is for reference only and does not include all contents. Flashforge shall not be liable for its complete-
ness or accuracy. If you have questions regarding the legality of copying or printing certain items, please consult the
legal counsel.
02