Setting Screen - Flashforge Creator 3 Pro User Manual

[Tools]- [Setting]Click the setting icon to enter the setting screen.
1. Language: To set the printer display language;
2. WiFi: To turn off/on the network connection;
3. WLan hotspot: To turn off/on the Wi-Fi hotspot;
4. FlashCloud: To turn off/on the cloud connec-
tion for downloading and printing function;
5. Door Opened Pause: To turn off/on the
door-opened pause;
11. Factory Reset: To return to factory settings;
12. Update: To reserve the updated function;
13. Platform Heat Preservation: After printing, the
platform is still in heat preservation;
14. 320 degree High Temperature Extruder;
15. Recovery printing: Resume printing after recovering
from power failure.

6.3 Setting Screen

6. Door Opened Remind：To turn off/on the door-opened
reminder prompt;
7. Startup Sound: To turn on/off the start-up sound of the
machine;
8. Left Filament Check: To turn on/off the left filament
inspection function;
9. Right Filament Check: To turn on/off the right filament
detection function;
10. Light Bar Control: To turn on/off the light bar inside
the machine;
25