Printing Via Usb Disk; Printing Via Flashcloud; Model Removal - Flashforge Creator 3 Pro User Manual

The equipment can perform printing via USB disk: save the sliced file to the USB disk, insert the USB disk into the
equipment, and select the corresponding file to print.
1. Enter the FlashCloud website, register your account, and then you can log in and use it after the email
activation.
FlashCloud: https: cloud.sz3dp.com
FlashCloud
Home
My Printer
Name
My Printer
My Model
My Job
Model Library
2. Click [My Printer] - [Add Printer].
Fill in the registration number (cloud registration code) on the Add Printer page, and name the printer. After
clicking OK, these information will appear in the FlashCloud interface of the printer.
Notice: Wait for the platform to cool down before operating.
Note
Warning: Please be careful when removing the model from the build plate with hand tools.
Sudden tool slippage and improper body position when removing the model from the build
plate may result in personal injury.
Attention: Do not scratch the build plate when removing the model. Scratches in the build
plate will lead to model creation errors.
Remove the magnetic steel plate and bend it and the model can be removed.

4.2 Printing via USB Disk

4.3 Printing via FlashCloud

+
Add Printer
The current printer is empty, please add a printer
Add Printer
All fields must be filled in
Name
Registration Code
OK

4.4 Model Removal

15
Registration Code
Cancel
Cn
Type