Flashforge Creator 3 Pro User Manual page 12

8. Filament feeding operation: Click the [Tools]-[Filament] button on the screen in turn, and set a reasonable heating
temperature according to the required temperature value of the material; Operate according to the screen prompts,
and wait for the nozzle to extrude uniform filament smoothly.
Filament unloading operation: Click [Unload], press down the filament pressing plate after the extruder temperature
heating is completed, pull out the white filament guide tube, and pull out the filament upward quickly and then
filament unloading is completed.
Withdraw
Filament
Guidetube
11
Push filament
down through
for 3 seconds
Press here