Installing The Heat Sink Fan - VersaLogic BayCat VL-EPM-31ECP Hardware Reference Manual

I
NSTALLING THE
Install the heat sink fan (VL-HDW-407) using these steps:
1. Position the fan assembly

Using Figure 39 as a guide, align the mounting holes of the heat sink fan with the four
holes in the passive heat sink. Position the fan so that its power cable is on the side
nearest the J24 CPU fan connector. The CPU fan connector is located between the Mini
DisplayPort connector and the microSD socket (see Figure 2 on page 12).
2. Secure the fan to the heat sink

Affix the heat sink fan using four M3 pan head screws.

Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.
3. Connect power to the fan

Connect the fan's power cable to the J24 CPU fan connector on the BayCat board.
EPM-31 Hardware Reference Manual
H S F
EAT INK AN
Figure 39. Installing the Heat Sink Fan
*** End of document ***
Thermal Considerations
76