Installing The Versalogic Thermal Solutions; Installing The Passive Heat Sink; Installing The Heat Sink Fan - VersaLogic Viper VL-EBX-38ECP Hardware Reference Manual

Installing the VersaLogic Thermal Solutions

The following thermal solution accessories are available from VersaLogic:
VL-HDW-401 Thermal Compound Paste - used to mount the heat sink to the heat plate

VL-HDW-406 Passive Heat Sink – mounts to standard product.

VL-HDW-407 Fan Assembly – mounts to HDW-406 Heat Sink.

I
NSTALLING THE
Install the passive heat sink (VL-HDW-406) using these steps:
1. Apply the Arctic Silver
Apply the thermal compound to the heat plate using the method described on the Arctic

Silver website -
2. Position the passive heat sink
Using the figure below as a guide, align the six mounting holes of the heat sink with the

heat plate.
3. Secure the passive heat sink to the heat plate
Affix the passive heat sink to the heat plate using six M2.5 pan head screws.

Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.

Figure 32. Installing the Passive Heat Sink
I
NSTALLING THE
Install the heat sink fan (VL-HDW-407) using these steps:
1. Position the fan assembly
EBX-38 Hardware Reference Manual
P H S
ASSIVE EAT INK
†
Thermal Compound
http://www.arcticsilver.com/
H S F
EAT INK AN
Thermal Considerations
67