Jumper Blocks; Jumpers Blocks In The As-Shipped Configuration; Jumper Summary; Figure 6. Jumper Block Locations - VersaLogic BayCat VL-EPM-31ECP Hardware Reference Manual

Jumper Blocks

J B
UMPERS LOCKS IN THE
J S
UMPER UMMARY
Jumper Block
V1 [1-2]
V1 [3-4]
EPM-31 Hardware Reference Manual
A -S C
S HIPPED ONFIGURATION

Figure 6. Jumper Block Locations

Table 1: Jumper Summary

Description
COM1 Rx End-point termination
•
In – COM1 terminator enabled for RS-485/RS-422
•
Out – COM1 terminator disabled (default)
COM4 Rx End-point termination
•
In – COM2 terminator enabled for RS-485/RS-422
•
Out – COM2 terminator disabled (default)
Configuration and Setup
Reference
Table 11, page 45
Table 11, page 45
19