Installing The Versalogic Thermal Solutions; Installing The Passive Heat Sink - VersaLogic BayCat VL-EPM-31ECP Hardware Reference Manual

Installing the VersaLogic Thermal Solutions

The following thermal solution accessories are available from VersaLogic:

VL-HDW-401 Thermal Compound Paste - used to mount the heat sink to the heat plate

VL-HDW-412 Passive Heat Sink – mounts to standard product.

VL-HDW-407 Fan Assembly – mounts to HDW-412 Heat Sink.
I
NSTALLING THE
Install the passive heat sink (VL-HDW-412) using these steps:
1. Apply the Arctic Silver

Apply the thermal compound to the heat plate using the method described on the Arctic
Silver website -
2. Position the passive heat sink

Using Figure 38 as a guide, align the six mounting holes of the heat sink with the heat
plate.
3. Secure the passive heat sink to the heat plate

Affix the passive heat sink to the heat plate using six M2.5 pan head screws.

Using a torque screwdriver, tighten the screws to 4.0 inch-pounds.
EPM-31 Hardware Reference Manual
P H S
ASSIVE EAT INK
†
Thermal Compound
http://www.arcticsilver.com/
Figure 38. Installing the Passive Heat Sink
Thermal Considerations
75