Leds/Indicators; Programmable Led; Figure 11. Locations Of The Leds/Indicators - VersaLogic BayCat VL-EPM-31ECP Hardware Reference Manual

LEDs/Indicators

Figure 11 shows the locations of the boards LEDs/indicators.
LED
D9/D8
D11
D12
P
ROGRAMMABLE
User I/O connector J4 includes an output signal for attaching a software controlled LED.
Connect the cathode of the LED to J4, pin 16; connect the anode to +3.3 V. An on-board 120 Ω
resistor limits the current when the circuit is turned on. A programmable LED is provided on the
CBR-4005B paddleboard. See Figure 27 on page 59 for the location of the Programmable LED
on the CBR-4005B paddleboard.
For instructions on how to switch the Programmable LED on and off, refer to the EPM-31
Programmer's Reference Manual (available on the
EPM-31 Hardware Reference Manual
Description
D5 Ethernet Port 0 status LED
D2 Ethernet Port 1 status LED
PCIe Mini Card LEDs
SATA/mSATA Activity LED
Power status LEDs

Figure 11. Locations of the LEDs/Indicators

LED
For more information, see...
Table 15, page 52
Table 15, page 52
Table 7, page 37
Figure 16, page 36
Figure 12, page 30
EPM-31 Product Support Web
Board Features
Page).
29