Table of Contents
Advertisement
Dimensions and Mounting
The EPM-31 complies with the PC/104 standard which provides for specific mounting hole and
PC/104-Plus stack locations as shown in Figure 5.
CAUTION:
The EPM
excessive flexing when expansion modules are attached and removed. Flex
damage caused by excessive force on an improperly mounted circuit board is
not covered under the product warranty.
EPM-31 Hardware Reference Manual
Figure 5. EPM-31 Dimensions and Mounting Holes
(Not to scale. All dimensions in inches.)
-
31 must be supported at all four mounting points to prevent
Introduction
15
Advertisement
Table of Contents
