Table of Contents
Advertisement
8
Network Interfaces
The EPM-31 provides two on-board Intel I210-IT Gigabit Ethernet controllers. The controllers
provide a standard Ethernet interface for 1000Base-T, 100Base-TX, and 10Base-T applications.
The I210-IT Ethernet controller auto-negotiates connection speed. Drivers are available to
support a variety of operating systems.
E
C
THERNET
ONNECTOR
The J7 connector provides access to the Ethernet ports 0 and 1. The J7 connector uses IEC
61000-4-2-rated TVS components to help protect against ESD damage. Figure 24 shows the
location and pin orientation of the Ethernet connector.
Figure 24. Location and Pin Orientation for the J7 Ethernet Connector
50
EPM-31 Hardware Reference Manual
Advertisement
Table of Contents
