Cabling; Pcie Mini Card / Msata; Table 5: Usb 3.0 J16 Connector Pinout; Table 6: Pcie Mini Card / Msata Pinout - VersaLogic BayCat VL-EPM-31ECP Hardware Reference Manual

Table of Contents

Advertisement

J16 Pin
1
2
3
4
5
6
7
8
9
10
Note: This signal is typically used for On-The-Go (OTG) mode. The BayCat does not support this mode.
C
ABLING
The VersaLogic VL-CBR-1015 cable is a USB 3.0 Micro-A to Micro-B adapter. The VL-CBR-
1015 cable can be used to connect the BayCat to any certified USB 3.0 hubs.

PCIe Mini Card / mSATA

The socket at location J14 accepts a full-height PCI Express Mini Card or an mSATA module.
The PCIe Mini Card interface includes one PCIe x1 lane, one hubbed USB 2.0 channel, and the
SMBus interface. The socket is compatible with plug-in Wi-Fi modems, GPS receivers, Flash
data storage, and other cards for added flexibility. The VL-MPEs-F1E series of mSATA modules
provide flash storage of 4 GB, 16 GB, or 32 GB.
For more information on PCIe Mini Cards offered by VersaLogic, contact
To secure a Mini Card or mSATA module to the on-board standoffs, use two M2.5 x 6mm pan
head Philips nylon screws. These screws are available in quantities of 10 in the VL-HDW-108
hardware kit from VersaLogic.
J14
PCIe Mini Card
Pin
Signal Name
1
WAKE#
2
3.3VAUX
3
4
GND
5
6
1.5V
7
8
9
GND
10
11
REFCLK-
EPM-31 Hardware Reference Manual

Table 5: USB 3.0 J16 Connector Pinout

Signal Name
+5V
USB-
USB+
ID
GND
MICA_SSTX-
MICA_SSTX+
GND
MICA_SSRX-
MICA_SSRX+

Table 6: PCIe Mini Card / mSATA Pinout

PCIe Mini Card
Function
Wake
3.3V auxiliary source
NC
Not connected
Ground
NC
Not connected
1.5V power
NC
Not connected
NC
Not connected
Ground
NC
Not connected
Reference clock input –
Direction
Out
+5.0 volts
I/O
USB 2.0 differential pair negative
I/O
USB 2.0 differential pair positive
In
Not used (Note)
Ground
Out
USB 3.0 transmit differential pair negative
Out
USB 3.0 transmit differential pair positive
Ground
In
USB 3.0 receive differential pair negative
In
USB 3.0 receive differential pair positive
mSATA
Signal Name
Reserved
+3.3V
Reserved
GND
Reserved
+1.5V
Reserved
Reserved
GND
Reserved
Reserved
Multi-purpose I/O
Function
Sales@VersaLogic.com
mSATA
Function
Not connected
3.3V source
Not connected
Ground
Not connected
1.5V power
Not connected
Not connected
Ground
Not connected
Not connected
.
34

Advertisement

Table of Contents
loading

Table of Contents