Wiring Connectors (Connector Configurations A B C D E F) - Mitsubishi Electric MELSERVO-J3 Series Instruction Manual

2. DIRECT DRIVE MOTOR

2.4.2 Wiring connectors (Connector configurations A B C D E F)

Connector
Feature
configuration
Type
A IP67 Straight
Note 1. The connector to be mated.
2. Purchase from Toa Electric Industry Co. Ltd., Nagoya Branch
Connector
Feature
configuration
IP67
EN compliant
B
General environment
(Note 1)
Note 1. Not comply with the EN.
2. The connector to be mated.
Connector
Feature
configuration
IP67
EN compliant
C
General environment
(Note 1)
Note 1. Not comply with the EN.
2. The connector to be mated.
Plug
Plug (Hirose Electric)
Plug Cord clamp
RM15WTPZK-12S JR13WCCA-8(72)
Plug Cable clamp
Plug (DDK)
Type Model name
CE05-6A14S-2SD-D
Applicable wire size: AWG 22 to 16
Straight
D/MS3106B14S-2S
Applicable wire size: AWG 22 to 16
Plug Cable clamp
Plug (DDK)
Type Model name
CE05-6A18-10SD-D-BSS
Applicable wire size: AWG 14 to 12
Straight
D/MS3106B18-10S
Applicable wire size: AWG 14 to 12
Cord
clamp
Recommended cable (Bando Densen)
Model name
20276
VSVPAWG#23×6P
KB-0492 (Note 2)
Cable clamp
Overall
diameter of
cable
[mm]
(Reference)
4 to 8
8 to 12
5 to 8.3
8.3 to 11.3
7.9 or less
(bushing ID)
Cable clamp (DDK)
Overall
diameter of
cable
[mm]
(Reference)
8.5 to 11
10.5 to 14.1
14.3 or less
(bushing ID)
2 - 9
Direct drive motor encoder
connector or absolute
Overall
position storage unit
diameter of
connector
cable
(servo amplifier side)
[mm]
(Reference)
8.2 RM15WTRZB-12P(72)
Direct drive motor power
supply connector (Note 2)
Model name
ACS-08RL-MS14F
(Nippon Flex)
ACS-12RL-MS14F
(Nippon Flex)
YSO14-5 to 8
CE05-2A14S-2PD-D
(Daiwa Dengyo)
YSO14-9 to 11
(Daiwa Dengyo)
D/MS3057-6A
Direct drive motor power
supply connector (Note 2)
Model name
CE3057-10A-2-D
CE3057-10A-1-D
CE05-2A18-10PD-D
D/MS3057-10A
(Note 1)