Cleaning The Nose Cone And Self Check Standard; Cleaning And Decontaminating The Trunarc Analyzer; Ordering Solution Kit (Type H) Test Sticks And Ethanol Vials; Locating The Trunarc Analyzer Serial Number - Thermo Scientific TruNarc User Manual

5
Maintenance and Getting Help

To send an email to Customer Support
Select

Cleaning the Nose Cone and Self Check Standard

If the nose cone becomes contaminated with dirt or drug residues, remove it,
open the self check standard, rinse the nose cone under clean running water,
dry it, and replace it on the analyzer.
To clean the self check standard, wipe it with a clean, soft cloth moistened
with water.

Cleaning and Decontaminating the TruNarc Analyzer

To remove nonhazardous contaminants from the outside of the analyzer,
wipe it with a soft cloth moistened with water.
To remove potentially hazardous contaminants, you may wipe down the
analyzer with a clean cloth moistened with a solution of 1 part household
bleach (5% sodium hypochlorite) and 10 parts water.
Before decontaminating the analyzer, turn it off and make sure that the
access door to the connector compartment is closed (see
Be sure to follow your organization's decontamination guidelines.
NOTE

Ordering Solution Kit (Type H) Test Sticks and Ethanol Vials

Order Solution Kit (Type H) test sticks and ethanol vials from the Thermo
Fisher Scientific sales department. Your local distributor can help you place
the order.
At regular intervals, check the expiration date on the ethanol vials and test stick
packages, and order new supplies when the date nears, to ensure that usable
TIP
supplies will always be available when needed.

Locating the TruNarc Analyzer Serial Number

The serial number is printed on a label on the back of the analyzer.
Serial numbers begin with the letters TN, followed by four digits (example:
TN0026).
46
TruNarc User Guide
Email Customer Support
in the Admin software main window.
page 13).
Thermo Scientific