Table of Contents
Advertisement
2-74 Installation Instructions
Daisy Chains
4. Remove the
a. Loosen the two hex nuts on either side of the internal cover using a 5/16" nut driver or
socket.
Figure 2-180. Loosening hex nuts
b. Disconnect the yellow solenoid cable for convenience.
Figure 2-181. Disconnecting solenoid cable
c. Lift the RFI cover off the two studs. Slide the wiring rubber grommets down the two
keyhole slots and remove the RFI cover completely.
Figure 2-182. PC board with RFI cover removed
External Return Bin Installation and Service Guide/67-2038 Rev D
RFI cover
that is under the PCB/solenoid mount.
© 2011 Omnicell, Inc.
Advertisement
Table of Contents
