OmniCell ERB Installation And Service Manual page 58

2-48 Installation Instructions
Installation on G4 Cabinets
5. Pass the
Figure 2-120. Passing the ERB PowerCom cable through opening
6. Make sure at least 15 inches of the cable is inside the cabinet.
Figure 2-121. Measuring length of cable inside cabinet
Note:
Do not secure the ERB PowerCom cable with the grommet yet to allow slack for routing the cable
around the E-box.
7. Connect the
Figure 2-122. Attaching the adapter cable to the PowerCom cable
External Return Bin Installation and Service Guide/67-2038 Rev D
ERB PowerCom cable through the opening.
ERB adapter cable to the ERB PowerCom cable.
© 2011 Omnicell, Inc.