Table of Contents
Advertisement
c. Lift the RFI cover off the two studs. Slide the wiring rubber grommets down the two
keyhole slots and remove the RFI cover completely.
Figure 2-76. PC board with RFI cover removed
7. Unplug the
Figure 2-77. J1 location on the PC board
8. Remove the gray
Figure 2-78. Removing the PowerCom cable
9. Squeeze and pull the black
© 2011 Omnicell, Inc.
PowerCom
cable from J1 on the PC board.
PowerCom cable
from the right side of the ERB and set it aside.
grommet
to remove it from the opening.
External Return Bin Installation and Service Guide/67-2038 Rev D
Installation Instructions 2-29
Installation on G3 Cabinets
Advertisement
Table of Contents
