OmniCell ERB Installation And Service Manual page 79

5. If there is no hole in the frame, route the ERB PowerCom cable up behind the ERB and
through the slot in the top of the back panel.
Figure 2-168. ERB cable routed behind AWS G4
6. Connect the ERB PowerCom cable to the
7. Route the cable across the top of the chassis and into the slot for the E-box.
E-box slot
Figure 2-169. ERB cable running across top of AWS chassis
8. Secure the cables to the cover with
9. Connect the adapter cable into the E-box.
Figure 2-170. ERB adapter cable connected to E-box
© 2011 Omnicell, Inc.
ERB adapter cable.
Back panel slot
ERB PowerCom cable
ERB adapter cable
Wireway cable
cable ties, using the anchors in the cover.
External Return Bin Installation and Service Guide/67-2038 Rev D
Installation Instructions 2-69
Installation on G4 Cabinets