Table of Contents
Advertisement
2-68 Installation Instructions
Installation on G4 Cabinets
3. Check the frame of the AWS just above the right side of the ERB. If it has a 1" hole in it, you
can route the
will exit through the same rectangular opening as the wireway cable. Install a rubber grommet
in the hole to prevent the cable from chafing
Figure 2-166. Hole in AWS G4 frame for routing ERB PowerCom cable
4. Snip the plastic edge guard and fit it into the slots in the top of the chassis to protect the cables.
Line both the rectangular slots: where the cable enters from the chassis, and the E-box slot
where the cable exits.
Figure 2-167. Chassis opening lined to protect cable
External Return Bin Installation and Service Guide/67-2038 Rev D
ERB PowerCom cable
through that hole and up through the chassis to the top. It
ERB adapter cable
Edge guard
Wireway
© 2011 Omnicell, Inc.
Advertisement
Table of Contents
