Table of Contents
Advertisement
10. Connect the
Figure 2-64. Molex connector
11. Pull any slack on the ERB cable out of the PC box.
12. Snap on the black
opening.
Figure 2-65. Grommet placement
13. Snap the metal retainer in the grommet groove to secure the cable to the inside back of the
electronic sled.
14. Secure new cables in the PC box using a
Figure 2-66. Secured cables
15. Cover the PC box with its lid.
16. Push the PC box back into place.
© 2011 Omnicell, Inc.
Molex connector
of the ERB cable with the AUX cable assembly.
grommet
over the ERB cable, then push it half-way through the second AUX
Kurly lock
or
cable
tie.
External Return Bin Installation and Service Guide/67-2038 Rev D
Installation Instructions 2-25
Installation on G3 Cabinets
Advertisement
Table of Contents
