OmniCell ERB Installation And Service Manual page 74

2-64 Installation Instructions
Installation on G4 Cabinets
5. Route the ERB PowerCom cable and adapter cable across the top of the chassis and into the
slot for the E-box.
E-box slot
Figure 2-156. ERB cable routed into E-box slot
6. Bundle excess cable lengths and secure the cables to the cover with
in the chassis.
7. Connect the ERB adapter cable into the E-box.
Figure 2-157. ERB cable connected to E-box
8. Close and lock the side cover.
a. Insert the bottom edge of the cover into the slot below the E-box.
Figure 2-158. Reinstalling E-box cover
External Return Bin Installation and Service Guide/67-2038 Rev D
ERB cable slot
ERB PowerCom cable
ERB adapter cable
Wireway cable
cable ties, using the anchors
© 2011 Omnicell, Inc.