Table of Contents
Advertisement
2-2 Installation Instructions
Setup
3. Lay the ERB down as shown in
under the ERB.
Figure 2-2. Unscrewing the fasteners
4. Turn the ERB upright and lift out both
Figure 2-3. Removing the I/O cover plates
5. Remove the
a. Open the return door.
b. Push the pawl of the solenoid to the left.
Figure 2-4. Pushing the pawl
External Return Bin Installation and Service Guide/67-2038 Rev D
Figure
PCB/solenoid metal
mount.
2-2, and unscrew the two
I/O cover
plates.
4-40 flat head fasteners
from
© 2011 Omnicell, Inc.
Advertisement
Table of Contents
