OmniCell ERB Installation And Service Manual page 60

2-50 Installation Instructions
Installation on G4 Cabinets
9. Connect the adapter cable to the E-box.
Figure 2-125. Adapter cable attached to E-box
10. Insert the adapter cable into the
printer paper holder.
Figure 2-126. Corrugated slit tubing
11. Snap on the black
12. Squeeze the grommet with pliers and insert it in the opening to secure the cable to the rear
panel.
Figure 2-127. Inserting the strain relief grommet
External Return Bin Installation and Service Guide/67-2038 Rev D
corrugated slit tubing
grommet around the ERB PowerCom cable on the outside.
(# 81-1302) that is located behind the
© 2011 Omnicell, Inc.