Switch Display - GRAUPNER MC-20 HoTT Programming Manual

Switch display

Displaying switch positions
Use the selection keys on the left or right touch pad
to scroll to the »Switch display« option in the multi-
function menu:
Model select Copy / Erase
Suppress codes Suppress models
Base setup model Model type
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve
Switch display
Model select Copy / Erase
Suppress codes Suppress models
Base setup model Helicopter type
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve Switch display
Open this menu option with a tap on the center
key of the right touch pad.
Switch 1 2 3 4 5 6
11 12 13 14 15 16
Contrl C1 C2 C3 C4 C5 C6 C7
switch
This feature is used to check the functions and
give an overview of switches 1 ... 16 and the
programmable control switches C1... C8.
If a switch is pressed, the switch number is revealed
by one of the display items changing from an OFF
to an ON symbol (or vice versa). To improve the
legibility of this screen, a closed switch fi eld is also
shown in inverse video (i.e. on a dark background).
134 Detail program description - Switch display
For control switches C1 ... C8, activation of the
corresponding transmitter control – which must have
been previously assigned on the »Control switch«
menu – will reveal the control switch number and
direction.
Note:
Switch numbering 1 to 16 as shown here corresponds
to the labeling of switch plug-in locations on the
transmitter's circuit board. The numbering of the
switches has no effect on the programming of the
transmitter, however.
SET
7 8 9 10
C8