Suppress Models - GRAUPNER MC-20 HoTT Programming Manual

Suppress models

Suppression of model memory locations
Use the selection keys of the left or right touch
pad to select the »Suppress models« menu ...
Model select Copy / Erase
Suppress codes Suppress models
Base setup model Model type
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve Switch display
Model select Copy / Erase
Suppress codes Suppress Models
Base setup model Helicopter type
Ser vo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 cur ve Switch display
... then briefl y tap the center SET key of the right
touch pad.
Model memories which are rarely needed or to
which access is to be blocked for other reasons can
be hidden from the model selection list. This also
clarifi es the overview layout for model selection.
The model to be suppressed/displayed is selected
with the selection keys of the left or right touch pad
then its status is switched over with a tap on the
center SET key of the right touch pad.
01 Graubele 1234g/080811
02 Ultimate Test
03 Starlet trim needed
04 BELL47G
05 free
Suppress : SET
A model memory which is "stricken through" will no
longer appear in the »Model select« menu.
01 Graubele
03 Starlet
04 BELL47G
05 free
06 free
07 free
01:23hR16
00:44hR12
00:33hR08
00:22hR08
1234g/080811 01:23hR16
trim needed 00:33hR08
00:22hR08
Detail program description - Suppress models
75