2/4 Ailerons And 1/2/4 Camber Fl Aps - GRAUPNER MC-20 HoTT Programming Manual

Model type: "2AIL 2FL"
If servos have been connected to the receiver as
described on page 61 and selected accordingly in the
»Model type« menu, page 94, then the abbreviations
"AILE" and "FLAP" refer to the following fl aps:
FL
AI
left
left
Since the options available on the wing mixer menu
and its sub-menus vary according to the number of
fl ap servos specifi ed on the »Model type« menu,
page 94, the list contains only those set-up options
available for the given model.
Therefore, with a preset to "2AIL 2FL", all options
for setting options for a second set of fl ap pairs will
be suppressed throughout the (right-side) column
labeled "FL2".
Al +100%
Ail-tr +100%
Diff. 0% 0% 0%
Fl.pos +100% 0% +100%
FL 0% 0% +100% +100%
El Fl 0% 0% 0%
Normal AILE FLAP
Model type: "2AIL 4FL"
If servos have been connected to the receiver as
described on page 61 and selected accordingly in the
»Model type« menu, page 94, then the abbreviations
"AILE", "FLAP" and "FL2" refer to the following fl aps:
168 Detail program description - Wing mixers
AI FL
left left
FL AI
Since the options available on the wing mixer menu
right right
and its sub-menus vary according to the number of
fl ap servos specifi ed on the »Model type« menu,
page 94, the list contains only those set-up options
available for the given model.
AI
Ail-tr
Diff.
Fl.pos
FL
El Fl
Normal
Model type: "4AIL 2FL"
0% 0%
If servos have been connected to the receiver as
0% 0%
described on page 61 and selected accordingly in the
0% 0%
»Model type« menu, page 94 , then the abbreviations
0% +100% 0%
"AILE", "AILE2" and "FL" refer to the following fl aps:
+100% +100%
0% 0% 0%
WK2
AI AI2
left left
Since the options available on the wing mixer menu
and its sub-menus vary according to the number of
FL2 FL2 FL AI
left right right right
+100% 0% 0%
+100% 0% 0%
0% 0% 0% 0% 0%
+100% 0% +100% 0% +100% 0%
0% 0% +100% +100% +100% +100%
0% 0% 0% 0% 0% 0%
AILE FLAP FL2
FL FL AI2 AI
left right right right
fl ap servos specifi ed on the »Model type« menu,
page 94, the list contains only those set-up options
available for the given model.
Therefore, with a preset to "4AIL 2FL", all options
for setting options for the fi rst and second set of
aileron pairs as well as those for the fl ap pair will be
displayed throughout.
Al +100% +100%
Ail-tr. +100% +100%
Diff. 0% 0% 0%
FL.pos +100% 0% +100%
FL 0%
0% 0%
El Fl 0% 0% 0%
Normal AILE AILE2
Model type: "4AIL 4FL"
If servos have been connected to the receiver as
described on page 61 and selected accordingly in the
»Model type« menu, page 94 , then the abbreviations
"AILE", "AILE2", "FLAP" and "FL2" refer to the
following fl aps:
AI AI2 FL FL2 FL2
left left left left
right
Since the "4AIL 4FL" selection represents the
maximum possible number of wing servos, in addition
to the columns labeled "AILE" and "AILE2" there will
now also be columns available labeled "FLAP" and
"FL2.
0%
0%
0% 0%
0% +100% 0%
0% +100% +100%
0% 0% 0%
FL
FL AI2 AI
right
right right