BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual page 52

SEAT REMOVAL AND INSTALLATION
SEAT REMOVAL AND INSTALLATION SEAT REMOVAL AND INSTALLATION SEAT REMOVAL AND INSTALLATION
Front Seat Wiring Harness &
B-Pillar Receptacle
An electrical harness receptacle
is located to the rear of each
seat base in the wall (at "B"
pillar). The seat wiring harness
plug connects to the receptacle
socket.
Before removing seats, be
certain seat wiring harnesses
are disconnected.
Disconnect seat
wiring harness
before removing
seat. Failure to do
so may result in
property damage.
Page 50
Figure 13
Seat Harness
B-Pillar
Connection
Passenger side front
seat base (riser) shown
without seat for clarity.
Seat
B-Pillar
Harness
Receptacle