BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual page 39

G
b. Close
a. Pull
I
Locked
WHEELCHAIR TIEDOWN AND OCCUPANT RESTRAINT
Wheelchair Tiedown
4. With buckle open, pull
loose end of strap until
tight (see Figure G).
While holding the loose
end with one hand, close
the buckle until it locks.
See Figures G and I.
5. Connect Velcro strips
™
to keep excess strap
off floor. See Figures H
and J.
Repeat procedures for all
tiedown straps.
Note: Check to see that
front and rear straps are
tight and the chair does not
have any movement.
Velcro
Velcro
Velcro
Attachment
H
J
Page 37