Table of Contents
Advertisement
OPERATION
Ramp Access Sliding Door
Press and hold the remote
keyless entry transmitter or
press and release one of
the interior control switches
to activate the power sliding
door (control switches de-
tailed on pages 12-14). When
a control switch is activated,
the door will open and the
Open sequence of functions
will continue (rear of vehicle
kneels and ramp deploys).
Once the Open sequence of
functions is complete, press
and release a control switch
to close the door. The door
will close after the ramp stows
and the vehicle raises (com-
pleting the Close sequence of
functions.
Page 16
Note: If a control switch is
pressed or the outside door
handle is pulled while the power
sliding door is opening or clos-
ing, the door will reverse direction
to the fully closed or fully open
position.
Note: If the power door is ob-
structed while opening or closing,
the door will reverse direction,
provided it meets sufficient resis-
tance.
Note: If the inside door handle
is pulled in the same direction
the power sliding door is operat-
ing, the door will continue in that
direction. If the inside handle is
pulled in the opposite direction
while the power sliding door is
opening or closing, the door will
reverse direction.
Keep clear of the area in which
the power door operates. Ensure
door travel path is clear. Per-
sonal injury or property damage
may occur during power door
operation. Be sure the door is
fully closed and latched before
driving.
Keep clear of area
in which power door
operates. Failure to
do so may result in
bodily injury and/or
property damage.
Advertisement
Table of Contents
