Seat Removal And Installation; Front Seats (General Information) - BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual

SEAT REMOVAL AND INSTALLATION

SEAT REMOVAL AND INSTALLATION SEAT REMOVAL AND INSTALLATION SEAT REMOVAL AND INSTALLATION
Front Seats: In an effort to
produce vehicles that can be
configured to meet a variety of
customer needs, the driver and
passenger seat bases have
been designed so they may be
removed. This feature allows
the owner and sales represen-
tative to determine the appro-
priate seating arrangement to
accommodate owner needs.
Park vehicle and
turn engine off
before removing
or installing seats.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Page 46
Driver and passenger side front
seats are equipped with quick-
release seat base attachments
that engage recessed floor strik-
ers. Remove and install seats as
detailed on pages 52-55. Note:
Driver and passenger side front
seats are not interchangeable.
Power Seats: Front seats are
equipped with electrical wiring har-
nesses to accommodate air bags
and optional equipment such as
climate controlled seats, heated
steering wheel, etc. Before remov-
ing seats, be certain all seat electri-
cal harnesses are disconnected.
When seats are removed, the seat
electrical harness plug must be
connected to the receptacle pro-
vided in the seat base. Seat wiring
harness details are provided on
pages 49-51.
When positioning seats, it is your
responsibility to reconnect all seat
electrical harnesses.
Air Bag Light: Failure to properly
connect power seat electrical har-
nesses may result in power seat
functions being disabled and/or
the air bag light illuminating.
Disconnect seat
wiring harness
before removing
seat. Failure to do
so may result in
property damage.