BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual page 17

Sliding Door Main Switch
The sliding door main switch
is located on the driver lower
left knee bolster. Pressing this
switch in disables power func-
tions. Pressing the switch again
and returning it to the out posi-
tion (button raised with orange
band visible) enables power
functions.
(orange)
IN: Power OUT: Power
Functions Functions
Disabled Enabled
Ramp/Kneel On/Off Switch
The ramp/kneel on/off switch is
located on the center console
at the front of the transmission
shifter. The 3-position rocker
switch allows the conversion to
operate in three different states.
RAMP ON
KNEEL OFF
RAMP ON
KNEEL ON
RAMP OFF
KNEEL OFF
512748
OPERATION
The ramp access power door is
active at all times. When driving
the vehicle and use of the ramp
is not required, the ramp can be
disabled. Doing so will eliminate
the possibility of inadvertently
deploying the ramp.
Press switch to up
position to enable
ramp & disable kneel.
Press switch to center
position to enable
ramp & enable kneel.
Press switch to down
position to disable
ramp & disable kneel.
Page 15