Page 1
Carony Transfers a person between wheelchair and car Carony 24”...
Page 2
Carony 24” Thank you for choosing a Carony from BraunAbility! The following manual is an important part of the product, providing you with information on how to achieve maximum performance and safe operation. Keep the manual in a safe place so that you can refer to it when necessary.
Page 3
Carony 24” Safety Operation Adjustments Brakes From the Carony to the vehicle From the vehicle to the Carony Driving the wheelchair Care instructions Introduction for users “Product certificate” at the end of the manual.
Page 5
Carony 24” To fold in or remove the Anti-tip protection, pull out the release button. When transported in a vehicle without the Carony swivel base, the Carony must have the Transporta- Use the back edge of the wheel unit as tread rail when tipping the whe- tion tie down mounted, in which the securing belts elchair over sidewalk edges etc.
Carony 24” Operation Adjustments Legrests Headrest Height adjustment / Mount the legrest into the legrest Push the headrest by hand, to adjust anchorage. There is a fixing track at the it forward or backward. The height Unscrew the height adjustment to adjust...
Page 7
Carony 24” B r akes Backrest Armrests Height adjustment / Release the brakes. Push the release le- The adjustment of backrest is limited to ver down and pull the units apart. Rotate avoid risk for tilting. Adjust the backrest Move the screw for the height adjust-...
Page 8
Carony 24” From the Carony to the vehicle 1. Preparing 2. Height adjustment 3. Docking onto the Carony Open the door and swivel the Turnout, Adjust to the correct docking height with For a Turnout, Turny HD / Orbit or Turny, fully outwards.
Page 9
Carony 24” 4. Sliding the seat in 5. Releasing the Carony The weight displacement means that the Push the release lever down and slide the Release the brakes. Push the release product into which the Carony docks seat into the car. Allow the user’s feet to lever down and pull the units apart.
Page 10
Carony 24” From the vehicle to the Carony 1. Preparing 2. Height adjustment 3. Docking the Carony Open the door and swivel the Turno- For a Turnout, Turny HD / Orbit Adjust to the correct docking height with ut, or Turny, fully outwards. Move the...
Page 11
Carony 24” 4. Pulling out the seat 5. Releasing the Carony The weight displacement means that the Push the release lever down and pull the Release the brakes. Push the product into which the Carony docks seat out to the Carony. Allow the user’s...
Carony 24” Driving the wheelchair To mount or dismount a rear wheel, press the button in the hub of the wheel. Note! Check that the wheel has been properly mounted by trying to pull it. There are three alternative positions for the driving wheels. Make sure that both wheels are in the same position.
Carony 24” Care instructions When necessary ............. Use a moist towel with some washing-up liquid to whipe off dust and dirt from frame and plastic parts. For upholstery use vacuumcleaner and upholstery cleaner. The seat cushion is detachable and can be machine washed in 40 degrees C.
Page 14
Carony 24” Please contact your installation engineer if you require further assistance or need to ask questions about warranty. We recommend keeping the following information to hand at all times Contact details for the installation engineer / Model / Serial number /...
Page 15
Carony 24” Introduction for users BraunAbility Europe AB would like you, as a user, to feel secure and comfortable with your new product. For that reason, it is your installer’s duty to go through the following with you / Safety...
E-mail: info @braunability.eu EN 12182 www.braunability.eu EN 12183 ISO 3795 ISO 7176: 1-19 ISO 10542 Declares that the product / ISO 8191-1 ISO 8191-2 Carony, model classic 12/24, Fixed, Kids BraunAbility Europe AB, Stenkullen 2019-04-02 Jan M Jensen Managing Director...
Need help?
Do you have a question about the Carony 24 and is the answer not in the manual?
Questions and answers