Table of Contents
Advertisement
Before Operation
Before utilizing wheelchair acces-
sible features, park the vehicle on
a level surface away from ve-
hicular traffic. Place the vehicle
transmission in Park and en-
gage the parking brake. Power
function control switches can be
activated only if the vehicle trans-
mission is in Park or Neutral.
Terminology
"Kneeling" is the lowering mo-
tion of the electrohydraulic rear
suspension. The term "deploy"
(unfold) indicates the lowering
motion of the ramp to the de-
ployed position. "Stow" (fold) is
the raising motion of the ramp to
the vertical (stowed) position.
The terms "Open" and "Close"
refer to sequences of power
functions that will occur when
activated by the electronic con-
trol system. When activating the
Open functions, the power door
opens, the kneel system lowers
the rear of the vehicle and the
ramp deploys. When activating
Close functions, the ramp stows,
the kneel system raises the rear
of the vehicle and the power
door closes.
Control System
Power functions are managed
by the electronic control system.
The control system can be acti-
vated using the remote keyless
entry transmitter or any one of
the controls addressed on pages
12-14.
OPERATION
BraunAbility
Aftermarket
®
Control Systems Policy
Control systems are designed,
tested and manufactured for
use with dedicated BraunAbility
products. These are the only
control systems authorized for
use.
Do not attempt to interface after-
market controls without authori-
zation from BraunAbility. To do
so may result in serious bodily
injury and/or property damage.
Page 9
Advertisement
Table of Contents
