BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual page 37

A
Keeper
Align engagement feet with holes.
C
Fully-engaged Plunger
WHEELCHAIR TIEDOWN AND OCCUPANT RESTRAINT
Keeper Fitting and "L" Track
Attachment Instructions
To Engage Keeper Fitting:
1. Insert keeper fitting into
track (align engagement
feet with holes in L-
Track). See Figure A.
L-Track
2. Push down on fitting
and slide fitting in either
direction until it clicks and
locks in position (see Fig-
ures B and C). Pull firmly
on strap to ensure fitting
is locked in track.
To Release Keeper Fitting:
Lift plunger and slide fitting
in either direction and lift
fitting out of track. See
Figure D.
a. Push down
on keeper.
b. Slide keeper in either direction.
a. Lift plunger.
b. Slide keeper and lift.
B
D
Page 35