Control Switches - BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual

OPERATION

Control Switches

Power door, kneel and ramp
functions can be activated
using the OEM remote keyless
entry transmitter or one of the
interior control switches identi-
fied on pages 12-14.
Press and hold the remote
entry transmitter switch until
the applicable function begins.
Press and release any interior
control switch.
The vehicle transmission must
be in Park (P), ignition (Off),
the sliding door unlocked and
the power sliding door main
switch be in the ON position
before power functions can
be activated. See page 15 for
power sliding door main switch
and ramp/kneel on/off switch.
Page 12
Remote Keyless Entry
Transmitter w/Power Hatch
Using the OEM remote entry
transmitter eliminates the need
for an additional remote control.
Press and hold
switch displaying
side door graphic.
Remote Keyless Entry
Transmitter
Using the OEM remote entry
transmitter eliminates the need
for an additional remote control.
Press and hold
switch displaying
side door graphic.