Table of Contents
Advertisement
Occupant Restraint
OEM Lap and Shoulder Belt
One adjustable lap belt extension is
supplied for use with the OEM lap
and shoulder belt (shown at right).
The extension belt is equipped with
a keeper fitting (anchor point) which
installs in the vehicle-mounted
"L" track. A female receptacle is
positioned on the opposite end of
the extension for attachment to an
OEM factory-installed upper torso
lap and shoulder belt.
The adjustable lap belt extension
is supplied with all conversions. A
rigid cable style lap belt extension
is available as an option (non ad-
justable). Attachment procedures
are identical for both types of lap
belt extensions. See the instruc-
tions on pages 38-41.
WHEELCHAIR TIEDOWN AND OCCUPANT RESTRAINT
Operate the OEM lap and shoul-
der belt as instructed in your
OEM owner's manual. Connect
the OEM lap and shoulder belt
to the lap belt extension. Posi-
tion the upper torso (shoulder)
belt across the center of the
shoulder. Position the lap belt
low across the front of the pelvis
(near hip). See the instructions
on pages 38-41.
Follow all restraint safety precau-
tions and instructions provided
in the OEM owners manual and
supplied by the belt manufac-
turer.
Adjustable
Rigid
Lap Belt
Lap Belt
Extension
Extension
(supplied)
(optional)
Note: An adjustable
lap belt extension is
supplied. A rigid lap
belt extension is avail-
able as an option.
Page 31
Advertisement
Table of Contents
