Seat Electrical Harnesses - BraunAbility Side-Entry Power Foldout built on the Hybrid Toyota Sienna Operator's Manual

Snap-in Seat Connectors
Front seat wiring harnesses are
equipped with a push button re-
lease snap-in connector (plug).
Operate connectors as detailed
here. See pages 50 and 51 for
the location of the harness plug,
B-Pillar receptacle and storage
receptacle.
To Disconnect: Press down
seat harness connector release
button to disengage connectors.
To Connect: Align the seat
harness connector alignment
key (guide) with the receptacle
socket alignment slot (will only
connect one way). Carefully
insert the seat harness plug in
the receptacle socket. Seat
harness connector will lock into
socket.
Figure 12
Seat Harness
Plug and
Receptacle
Plug
Release
Button
SEAT REMOVAL AND INSTALLATION
Alignment
Alignment
Key
Seat
Harness
Plug
Slot
Connector
Receptacle
Page 49