Example For An 12-Pin Connection - Pilz PSEN sc M 3 Series Operating Manual

First commissioning
11. Click on the arrow
Create the zones using the symbols in the tool bar on the right-hand side.
12. Click on
Specify at least 3 (max. 15) reference points. Specify a max. permitted tolerance for
each reference point. Tol - is the tolerance for the side that faces the safety laser scan-
ner, Tol + is the tolerance for the side that is facing away from the safety laser scanner.
9.3.2

Example for an 12-pin connection

Settings in PSENscan Configurator for a safety laser scanner with 12‑pin connection: Ver-
tical application with reference contour monitoring, 1 zone set, 1 warning, manual restart
Procedure:
1. From the start page, select Create new configuration.
The window Device selection is displayed with one tab each Online and Overview of
all types.
2. Select a PSEN sc M device from Overview of all types. Double-click the device.
The device is displayed in the work window and it can be configured.
3. Under Application, select VERTICAL and 12-pin connection.
Configuration
You can enter a title for the configuration under Name.
You can enter the name of the person who created the configuration under Author.
You can describe the configuration in detail under Description.
The Configurator Version is entered by the system and cannot be changed.
The Check sum is entered by the system and cannot be changed.
The Creation date is entered by the system and cannot be changed.
Operating Manual PSEN sc M 3/5 series
1005055-EN-02
WARNING!
Loss of safety function due to a safety distance that is too low
Depending on the application, serious injury or death may result.
}
Depending on the degree of dust filtering, it is necessary to consider an
allowance for calculating the safety distance when installing the safety
laser scanner near intense light sources or reflective surfaces into ac-
count (see Distance to intense light sources and to reflective
surfaces [ 37]).
– When calculating the safety distance, ensure that the allowance is
considered depending on the dust filtering.
– Ensure that the new safety distance fulfils the specifications of the
safety assessment.
. The next window Configure zones is opened.
.
| 72