Single Connection - Pilz PSEN sc M 3 Series Operating Manual

Wiring
*1
For use in an industrial environment, Pilz recommends double-shielded twisted pair cables
(S/STP). Only shielded RJ45 connectors should be used.
*2
Twisted pair cables (TP cable) consist of twisted core-pairs. Twisted pair cables are divided
into categories in accordance with their electrical features (attenuation, cross-talk). Cat-
egory 5 cables are specified for transferring data with Pilz Ethernet interfaces.
TP cables for Ethernet applications generally have an impedance level of 100 Ohm.
6.5.1

Single connection

Procedure:
1. Use a 4-pin cable (see
the safety laser scanner.
2. Use the safety laser scanner with an 8-pin cable (see
the supply voltage and an
3. Switch the safety laser scanner on.
4. Configure the safety laser scanner in PSENscan Configurator. [
Operating Manual PSEN sc M 3/5 series
1005055-EN-02
PSEN sc B 5.5
PSENscan Configurator
Order references [
evaluation device [
Evaluation device
99]) to connect the configuration PC to
Order references [
69].
99]) with
65]
| 54