Wiring
6.5.2
Series connection
Procedure:
1. Use a 4-pin cable (see
the safety laser scanner.
2. Use a 8-pin cable (see
slave unit.
With several slave units, connect the slave unit to the following slave unit.
3. Use the safety laser scanner with an 12-pin cable (see
the supply voltage and an
4. Switch the safety laser scanner on.
5.
Configure the safety laser scanner in PSENscan Configurator. [
Operating Manual PSEN sc M 3/5 series
1005055-EN-02
PSEN sc 3/5 M b/e
PSENscan Configurator
Order references [
Order references [
evaluation device [
Evaluation device
PSEN sc 3/5 S
99]) to connect the configuration PC to
99]) to connect the master unit to the
Order references [
69].
99]) with
65]
| 55