H3C MSR 810 Command Reference Manual page 12

Views
Any view
Predefined user roles
network-admin
network operator
-
Examples
# Display IRF link information.
<Sysname> display irf link
Member 1
IRF Port
1
2
Member 2
IRF Port
1
2
# Display IRF link information.
<Sysname> display irf link
Member 1
IRF Port
1
2
Member 2
IRF Port
1
2
Table 3 Command output
Field
Member ID
IRF Port
Interface
Status
Interface
disable
Ten-GigabitEthernet1/0/1(MDC1)
Ten-GigabitEthernet1/0/2(MDC2)
Ten-GigabitEthernet1/0/3(MDC3)
Interface
Ten-GigabitEthernet2/0/1(MDC1)
Ten-GigabitEthernet2/0/2(MDC2)
Ten-GigabitEthernet2/0/3(MDC3)
disable
Interface
disable
Ten-GigabitEthernet1/0/2
Interface
Ten-GigabitEthernet2/0/2
disable
Description
IRF member ID.
IRF port number:
•
1—IRF-port 1.
•
2—IRF-port 2.
Physical interfaces bound to the IRF port. This field displays disable if no
physical interfaces have been bound to the IRF port.
Link state of the IRF physical interface:
•
UP—The link is up.
•
DOWN—The link is down.
•
ADM—The interface has been manually shut down by using the
shutdown
•
ABSENT—Interface module or expansion interface card that hosts
the interface is not present.
Status
--
UP
ADM
DOWN
Status
UP
DOWN
ADM
--
Status
--
UP
Status
UP
--
command.
6