Display Mad - H3C MSR 810 Command Reference Manual

display mad

Use
display mad
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose : Displays detailed MAD information. If you do not specify this keyword, the command only
displays whether a MAD mechanism is enabled or disabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD enabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Multi-active recovery state: No
Excluded ports (user-configured):
GigabitEthernet1/0/1
GigabitEthernet2/0/1
Excluded ports (system-configured):
GigabitEthernet1/0/2
GigabitEthernet2/0/2
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled interface: Route-Aggregation2
MAD status
Member ID
1
2
MAD BFD enabled interface: Route-Aggregation2
MAD status
Member ID
1
2
to display MAD status and settings.
: Normal
Port
GigabitEthernet1/0/3
GigabitEthernet2/0/3
: Normal
MAD IP address
192.168.1.1/24
192.168.1.2/24
MAD status
Normal
Normal
Neighbor MAD status
2 Normal
1 Normal
8