Set Memory Vm; Set Sriov - H3C MSR 810 Command Reference Manual

set memory vm

Use
set memory vm
Syntax
set memory vm vm-name size size
Views
VMM view
Predefined user roles
network-admin
Parameters
: Specifies a VM by its name. The
vm-name
characters.
size size
depends on the memory size of the device.
Usage guidelines
To ensure that a VM can operate, make sure the VM is allocated a minimum of 512 MB of memory.
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
Examples
# Allocate 1048576 KB of memory to VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] set memory vm centos7 size 1048576

set sriov

Use
set sriov
Use
undo set sriov
Syntax
set sriov pf pfid vf vfid vlan vlan-id
undo set sriov pf pfid vf vfid vlan vlan-id
Views
VMM view
Predefined user roles
network-admin
Parameters
: Specifies a physical SR-IOV NIC by its PF ID. The value for the
pf pfid
: Specifies a vNIC by its VF ID. The value range for the
vf vfid
vlan vlan-id
Usage guidelines
Make sure the physical NIC network mode is SR-IOV share.
to allocate memory to a VM.
: Sets the size of the VM memory, in KB. The value range for the
to specify the VLAN to which a VF interface belongs.
to remove a VF interface from a VLAN.
: Specifies a VLAN ID in the range of 1 to 4094.
argument is a case-sensitive string of 1 to 30
vm-name
vfid
25
argument
size
argument is 0.
pfid
argument is 0 to 7.